Program Requirements:
Device:
Palm III, Older PalmPilots that have been upgraded to the Palm III level with the 2meg upgrade board (with IR), Any Palm OS PDA with the OmniRemote external IR module
36 K free RAM

Pacific Neo-Tek has done what everyone said couldn't be done... allow the Palm III to be a universal remote control using its built in IR receiver / transmitter.  The OmniRemote software accomplishes this feat and does it extremely well.  One of the reasons why people said this couldn't be done was because of the weak IR transmitter in the Palm III. It is just too dim causing the IR range to be very short. And, they weren't wrong, it is true that the range is short. But, Pacific Neo-Tek solved that problem also with their optional external IR module. It increases the power of the built in IR beam to as much as 400% and does not require batteries.  This module is required for non Palm III PDAs or PalmPilots that have not been upgraded with the 2meg upgrade that includes the internal IR.  The module plugs into the hotsync port of your PDA.

I tested OmniRemote on my Palm III with and without the external module. I also did the testing using a fresh set of batteries.

The first step in turning your Palm III into a remote is to create the remote screens that you'll see on your PDA. You can create up to 15 different screens. Screens are made up of labels and buttons.  Buttons can do one function like power on a device or can be a macro that includes lots of different functions.  The OmniRemote software is quite nice in that you can draw the buttons on the screen and then later resize, move, delete and edit them if you wish.  Buttons can have text descriptions or can have graphical icons.

After you have created the screens, then you have to learn the commands that you want each button to perform.  This requires you to first change to training mode. You then hold your physical remote control near the IR port on the Palm III and press the appropriate button on the screen that you want to learn and then the physical button on the remote. The actual training of the screens is what is the most time consuming in setting up this software. But, you only need to do it once so the time spent is worth it. It is best if you do the training in a dim room. The software will beep at you if conditions are too bright.  If you have problems training a certain remote control, you can also change the receive frequency.  During my testing, I just set it on 'auto' and had no problems training my Magnavox TV, RCA VCR and RCA DSS Satellite system.

After I had trained my three devices, I conducted a test to see how strong the internal Palm III IR was versus the external OmniRemote IR module. Here were my findings:

As you can see from the above results, the external IR module really makes a difference. I also found that the Palm III's internal IR was much more sensitive to the angle of the remote. I had to hold the Palm III's IR almost perfectly horizontal with the device I was wanting to control in order for it to recognize my commands.  My Magnavox TV was the pickiest in this respect.  After I plugged in the external IR module, things were much better. I could actually sit in my LazyBoy chair and hold the Palm III at a much more comfortable angle.  A neat feature of the software is the ability to flip the screen around so that it won't be upside down when you're using the external IR module.

I also found that the external IR seemed faster than the internal IR. I say this because I created a macro button called VH1. This macro would change to channel 263 on my DSS.  When I used this macro while using the internal IR, it would sometimes switch to channel 23 or 63 because it would miss some of the numbers. The external IR worked fine every time.

OmniRemote will also let you create up to 32 timers that let you schedule macros for unattended operation. Of course, you'll have to leave your Palm III in front of the device that you want to control in order for this to work :-)  Timers can be set to repeat daily, weekly, or every week day. Timers have a start operation and end operation. For example, you could create a macro called TAPE ER that would turn on your VCR, turn to NBC and press REC. Then create a macro called STOP TAPE that would press STOP on your VCR and then power it down.  You would then create a timer in OmniRemote for the desired time, set the Start operation to your TAPE ER macro and the end operation to your STOP TAPE macro.

I found that the timers worked fine but, there are 2 little annoyances. The major one is that you MUST make sure that OmniRemote is the last application that you were running when you turned off your Palm III. If it isn't, the timers will not turn on your Palm III.   The other annoyance is that when a timer is fired, it turns on your Palm III and plays the start macro and then just sits there till the Palm III turns off from inactivity.  I think it would be nicer if the Palm III turned on, played the start macro, then turned off the Palm III. This would save your batteries a bit.

In summary, OmniRemote is a very geewhiz piece of software. The ability to turn your Palm III into a remote is very cool.  Some people might say "why use a $300 PDA as a TV remote...", I say "why not!".  It just shows that our favorite PDA can do almost anything!  Give this software a try. A demo version is available on the Pacific Neo-Tek website.

Price: $20 OmniRemote software, $40 OmniRemote external IR module w/software included

Pros:
Works with the Palm III's internal IR.
Inexpensive software.
Optional external IR module available that is much more powerful.

Cons:
Palm III internal IR has limited range.
Using timers requires you to leave your PDA in front of the device you will be controlling.